Technical library
Practical guides to specifying, applying and looking after Fendolite-MII. Each one is written from Promat's published procedures and names its sources.
Applications
Quality and maintenance
Performance
Promat documents
Promat's Energy Industry Data Sheets set out the approved procedure for each application. Each opens as a PDF. Product and safety data sheets are on the data sheets page.
Energy Industry Data Sheets
These Promat documents are provided for information. Some are several years old, so always check the current Promat application manual, data sheets and certification before specifying or applying, or ask us.
- EIDS 000 Index Table
- EIDS 001 Application on horizontal vessels for ambient storage
- EIDS 002 Application on spheres for ambient storage
- EIDS 003 Application on vertical vessels for ambient storage
- EIDS 004 Application on ambient vessel skirts over 20 m²
- EIDS 005 Application on ambient vessel skirts under 20 m²
- EIDS 006 Application on pipework
- EIDS 007 Application on cryogenic vessel skirts
- EIDS 008 Application of a keycoat on Foamglas
- EIDS 009 Application on horizontal vessels for cryogenic storage
- EIDS 010 Application on spheres for cryogenic storage
- EIDS 011 Application on vertical vessels for cryogenic storage
- EIDS 012 Application on concrete columns and concrete encased steel columns
- EIDS 013 Application on horizontal vessels for high temperature storage
- EIDS 014 Application on high temperature vessel skirts
- EIDS 015 Application on insulated steel storage saddles
- EIDS 016 Off-site application
- EIDS 017 On-site hook-up after off-site application
- EIDS 018 Application on PU painted steel
- EIDS 019 Application of a keycoat on steel
- EIDS 020 Application of a keycoat on concrete
- EIDS 021 Application on steel storage legs
- EIDS 022 Application on primed steel using Promat PSK 101
- EIDS 023 Application on primed steel structures using a keycoat
- EIDS 024 Application on galvanised steel
- EIDS 026 Application on vertical vessels for high temperature storage
- EIDS 027 Sheeting in against cold or wet weather
- EIDS 028 Choice between Promat Topcoat 200 and Sikalastic topcoat
- EIDS 029 Inspection, maintenance and repair
- EIDS 030 Application of Promat Topcoat 200
- EIDS 033 Application of Sikalastic topcoat
- EIDS 038 Coverage rate
- EIDS 039 Fendolite-TG: repair of Promat Mandolite 550
- EIDS 040 Application of mastic sealant at terminations
- EIDS 041 Application on concrete covered vessel skirts
- EIDS 042 Removing and replacing for non-destructive testing of steel
- EIDS 043 Application of Promat Helical CD Weld Pins
- EIDS 044 Application on stainless steel storage legs
- EIDS 045 On site thickness checking and tolerances
- EIDS 046 Application on concrete encased steel vessel support legs
- EIDS 047 Application of an additional layer on legs
- EIDS 048 Application of an additional layer on spheres
- EIDS 049 Promat PSK 101 or keycoat
- EIDS 050 Application of Promat PSK 101 on steel
- EIDS 051 Application on horizontal vessels for high temperature storage using Slimflex
- EIDS 053 Fendolite-TG: mixing and application
- EIDS 054 Controlling consistency and wet density
- EIDS 055 Application in hot climates
- EIDS 056 Thickness adjustment for high service temperatures
- EIDS 058 Shelf life
- EIDS 061 Coatback distances
- EIDS 062 Fendolite-TG: application on primed steel using Promat PSK 101
- EIDS 063 Mesh-free application
- EIDS 066 Application on vertical stainless steel vessels for ambient storage
- EIDS 067 Thickness control using spacers and timber laths
- EIDS 068 Relevance of ASTM D790
- EIDS 069 Relevance of ASTM D2240
- EIDS 071 Blast resistance
- EIDS 072 Thickness comparison to Promat Mandolite 550
- EIDS 073 Corrosion under insulation
- EIDS 074 UL 2431 Environmental Exposure
Typical details
Promat design sketches for Fendolite-MII on steel sections and vessel skirts. The four general details (G-001, G-008, G-009 and G-010) show the helical CD weld pins, the plastic coated galvanised mesh and the mastic seal on a steel section. They are guidance only and not for production.
- CAF-FMII-G-001 General detail, 3-sided protection, profiled
- CAF-FMII-G-008 General detail, 3-sided protection, solid fill
- CAF-FMII-G-009 General detail, 4-sided protection, profiled
- CAF-FMII-G-010 General detail, 4-sided protection, solid fill
- CAF-FMII-G-012 General detail, beam and column
- CAF-FMII-G-013 General detail, holding down bolts on vessel skirts
- CAF-FMII-G-015 Vessel skirt, ambient temperature
- CAF-FMII-G-014 Vessel skirt, elevated temperature
- CAF-FMII-G-016 Vessel skirt, sub-zero temperature
- CAF-G-004 Sprayhead assembly with suggested set-up
Certification
The UL Certificate of Compliance for Fendolite-MII and Fendolite-TG is described in our guide to certification and fire classification. Ask us for a copy.
Technical questions
Send us your question. We can answer most ourselves, and we refer anything we cannot to Promat's technical team.
