Where Fendolite is used

Fendolite-MII protects steel and concrete from hydrocarbon pool fires and jet fires.

Fire protected steel pipe supports on a process plant

Structural steelwork

Columns, beams, bracing and pipe racks in process areas. The primed steel is given a PSK-101 keycoat, and plastic coated galvanised mesh is fixed to Promat helical CD weld pins. Fendolite-MII is sprayed to the specified thickness and finished with Topcoat 200.

Products: PSK-101, PCG Mesh, Fendolite-MII, Topcoat 200

Rope access team spraying fire protection on a storage sphere

Storage spheres

Nothing is welded to the shell of a sphere. Collars of Fendolite-MII hold galvanised welded wire mesh off the shell, and the mesh is carried on floating support rings and drop wires. The legs are wrapped in plastic coated galvanised mesh. The work is often done by rope access.

Products: PSK-101, galvanised welded wire mesh, PCG Mesh for the legs, Fendolite-MII, Topcoat 200

LPG storage vessel protected with Fendolite-MII and a white topcoat

Horizontal vessels and bullets

LPG bullets and other horizontal storage vessels, with their saddles and supports, protected against hydrocarbon pool fire and jet fire. Welding is not normally allowed on the vessel, so collars and bands of Fendolite-MII hold galvanised square mesh off the shell.

Products: PSK-101, galvanised square mesh, Fendolite-MII, Topcoat 200

Vessel skirt coated with Fendolite-MII and a grey topcoat

Vessel skirts

The steel skirts that carry columns and vertical vessels. Skirts up to 20 m² can use plastic coated galvanised mesh. Larger skirts are built up in two layers with galvanised welded wire mesh between them. Every junction with the steel is sealed with mastic.

Products: PSK-101, PCG Mesh or galvanised welded wire mesh, Fendolite-MII, Topcoat 200

Fendolite on the support legs of stainless steel tanks in a distillery

Tank legs and supports

The legs, saddles and supports under process tanks, including stainless steel tanks in distilleries and food and drink plants. Each leg is given a PSK-101 keycoat, wrapped in plastic coated galvanised mesh and sprayed with Fendolite-MII. Fendolite-TG is used for hand finishing and repairs.

Products: PSK-101, PCG Mesh, Fendolite-MII, Fendolite-TG, Topcoat 200

Steel module coated with Fendolite-MII in a workshop, with pallets of Fendolite behind

Off-site application

Fendolite-MII can be applied to steel in a workshop or yard. Plastic coated galvanised mesh is fixed to Promat helical CD weld pins, the Fendolite-MII is sprayed and left to cure for at least seven days, and the steel is then delivered to site. Only the connections are made good on site, which takes fire protection off the critical path.

Products: PSK-101, PCG Mesh, Fendolite-MII, Fendolite-TG for the joints, Topcoat 200

Road tunnel

Tunnels

Sprayed to tunnel walls and soffits to stop the concrete lining spalling in a fire. Fendolite-MII has been fire tested to the RWS tunnel fire curve, and Promat calculate the thickness for each tunnel.

Products: Fendolite-MII. The reinforcement and fixings are set by the tunnel design.

How the system goes together

This Promat film shows each layer of the Fendolite system on steelwork, spheres, vessels and vessel skirts, from the primer through to the topcoat.

Our sister company, Firetech (UK) Limited, is a licensed Fendolite applicator and can apply the system as well. Visit Firetech (UK) Limited.

Tell us what you are protecting

Send us the details and the delivery postcode and we will send a written quotation.

Request a quote